Reaction tube: understanding, function and treatment
Hello lab blog friend in this article I'm going to talk about a lab tool called Reaction tube Which here will be explained from the beginning of the function and also how to do a good, true test tube reaction. So please see below the complete discussion.
Images
Below this is the form of a test tube that you can see through the following image:
Understanding
The reaction tube is a tool to ease the research process inside the lab. It can be filled with solid media to liquid, the function of tube reactions is shared within a few points.
Function
Reaction tube function adalah untuk mencampur, menampung dan memanaskan bahan-bahan kimia cair atau padat, utamanya untuk uji kualitatif. Selain berukuran kecil ada juga Tabung reaksi yang memiliki ukuran besar. Alat tersebut dinamakan Labu didih. Rak Tabung Reaksi. Baca juga “Test Tube Prices and Sizes“.
Usage
To reaction tube usage Please follow the following steps:
- The reaction tube is held to her neck, lowering it a little 60 and then filled with a solution that will be checked with a drip.
- If the tube and its contents are heated, the tube is held by a tube holder and the heating is done in an area 1 / 3 of the fluid from the bottom of the tube mouth should be directed to itself or others.
Care
Here's how How to treat the test tube Good and right,
- Storage at 270C - 370C and light 25 watts.
- The room was given silicon as a higroscopic substance.
- Use alcohol, acetone, cotton and wind pumps to clean dust.
- By the time the heat should be over the gauze wire, it may directly be the origin of the material from the pyrex.
- Boiled glass goes into cold water first, then heated slowly
- When you're done with it, the glass is cleaned, it can use clean water, detergent, or solution.
